Update nccad9a WABECO eng - MAXcomputer & mechatronik

Direkt zum Seiteninhalt

Hauptmenü:

Update nccad9a WABECO eng

WABECO

Updated/Aktualisiert: Dec. 2020


Please have also a look in our shop where you can order more accessories like handwheel with axes switch for 2 or 3 axes, tool-length measurer, 3D-scanner, etc.

Wählen Sie Ihre Sprache
 Select your language  Choisir votre langue

Download nccad9

Update of December, 2020 for WABECO customers, who have already installed nccad9prof!


Notes concerning the installation of nccad9
nccad9 requires the .NET-Framework 2.0. Since Windows7 it is part of the operating system.
Depending on the version of your operating system and the type of installation it may be necessary
to activate the .NET-Framework 2.0 separately as feature in the operating system.
You find relating instructions in the internet.
After the installation of nccad9 it may be possible that the operating system displays a message:
"This program might not have installed correctly"
Usually this message can be ignored.
If problems occur with the execution of nccad9 after installation it is advised to repeat  
installation explicitly as administrator.
We recommend to run nccad9 as administrator.


Download update nccad9
- As update of full version for registrated customers of nccad9a with licence key.
- As demo version
(without saving, printing, machine control)
  for prospected customers without valid licence key.

1. Start
the downloaded Setup.exe file by double click,
2. note
the explanatory window and follow the installation instructions.
Attention:

The setup must be done in the same folder where your previous nccad9a
is saved, the only way to ensure that your licence is maintained! Normally your file save path is C:\Programs (x86)\nccad9:

New functions and supplements

Date: December 2020
New
  • Improvement of data input in group technology, the wildcard * is autom. removed with input of admissable characters.
  • Circle-/ Arc interpolation in the MCS minimizes communication and possible spooler idling, requires at least Firmware Master x.x.49.44 and axes Slave 49.08.
  • COM-Port-Numbers up to 32 added, required for USB-Serial-Adapter at PCs with virtuel COM-ports.
  • Check of the collet when autom. toolchanger is added to adjustable parameters.
Supplements, Corrections
  • Display of confirmation message after teach-in of start position of tool length measuring [CTRL + F12].
  • Correction of display for points P1 and P2 with engraving text MAX-multiline.
  • Correction of coordinate display for multi-axes systems.
  • Correction of shifting direction Rectangle, when shifted by ZT-editor.
  • Correction Relative <-> Absolute-Positioning for G8x-cycle (customer specific function).
  • Correction of vertical alignment with engraving text MAX ml.
  • Correction of simulation Oblong hole (Anticlockwise).
  • Correction of functions for "Catch window in working area".

Date: December 2019
New
  • Display of the logotype on the header of a printout of drawing files
  • Portable-Version "nccad9 solo" available as testversion
Supplements, Corrections
  • Revision of G77 execution as Basic-Macro
  • Determination of fonts for labelling and dimensioning
  • Query of file version "... was generated with a newer version" is corrected
  • Spindle revs for turning added
  • Replacement of tools in tool correction memory is revised, the old data are deleted
  • Corrections for the printout of drawings concerning dimensional accuracy and page layout
  • Revision of issue of NC-Code with "Quick&Simple"

Date: October 2019
New
  • Combination of communication modes for Windows10 and older versions of operating systems (Threading),
  • Engaving texts at arc,
  • Display of the Chip-ID in the window "Help --> Version",
  • Extension of the WZP-table and the editing window for all axes (X, Y, Z, U, V, W, A, B, C)
  • Display of the coordinates for active slave addresses only
Customer specific functions
  • Engraving texts with sequence of number-projects
  • G81 - Drilling cycle
  • G87 - Rectangular pocketing
  • G20 and G22 with DIN-query
  • DXF-Export for trivial drawing elements
  • NC-Point with/without positioning
Supplements, Corrections
  • Load drawings from nccad75 with engraving text at arc
  • Workpiece copies Oblong hole
  • Drawing element gear and standard thread
  • G54
  • Separate F for Z
  • Save under write-protected files
  • Read parameter settings for workpiece copiesAdoption of the Windows 10 features in all versions
Date: December 2018
New:
  • Adoption of the Windows 10 features in all versions
  • Addition of the code G99 by the CAM-module at the end of the program
  • Integration of the tool correction memory "simple" as alternative to the (previous) tool correction memory "extended"
  • Extruder type 12 (KSZDK12) integrated
  • Touch code G17
Supplements, corrections:
  • Drawing element Unclamping position is found in CNC only if in a visible group
  • Label evaluation in Tools.knc for autom. toolchanger
  • Start sequence of the axes is changed for TURN: Z before X

Date: 2017-04-10
New functions:
  • Adation of the COM-Port-search window, extension for saving the COM-port
  • Load Basic macros without new launch of nccad9
  • Integration of  functions to the control of a (model building-) servo by PWM , extension of the codes M26 and M25
  • Integration of a code to control the encoder regimes for C- and HPC-axis
  • Extension of the tool-length measuring functions, implementation of new parameters with M98
  • Integration of a universal method for dispensing and special applications - the Macro-Method "G65 Up/Down".

Supplements, corrections:
  • Correction of the coordinate display for Interfaces smaller IF5
  • Correction of rounding inaccuracy with circles
    When the angle error is smaller than 10 thousandth degree, a full circle is accepted.
  • Adaption of cancel conditions for LookAhead travels
  • Adaption for ProgramStart and ProgramEnd macros, adopted for spooler
  • Correction of cancel criteria for chamfer and thread cutting
  • Correction in the list of tool sequence
  • Safeguard of Tools.knc for autom. tool changing
  • Correction of the paths to tool files
  • Adaptions in the NC-data editor
  • Realisation of emergency stop by ENTER-key  

Date: 2016-03-21
New functions, supplements, corrections:
  • Supplement of the function "Documentation"
  • Supplement of the query Digital inputs before and after machining in Technology
  • Safeguarding when files are closed
  • Integration of the parameter "Spooler-Start"
  • Extension of the basic-macros, adaptation of the user interface
  • Revision of the function "Scale" for drawing elements
  • Corrections in connection with High Power C-Axis
  • Corrections in Technologies with Z-zeropoint shift
  • Revision of engraving texts without cycles.
  • Operating hours of the CNC-Program and working hours of the linear axes are registered separately.
  • Operating hours can be read in the window „Version“ without opening manual control before.
  • Revision of the resolution of OpenGL-Simulation.
  • More choice with tool-length measuring.
  • Macros for manual control.
  • Reference run (- +) for U-axis.
  • Revision of pocket milling.
  • New code "M25 Sn" for direct input of revs for BAE/ main spindle.
  • Revision of manual control for tension controlled BAEs : Revs, tension and switch of relay2 in mutual interdependence.
  • Supplement of input key in the field "touch diameter".
  • Correction of partial feed in CAM.
  • DXF-Export function (specific, on demand).

Date: 2015- 04 -14

New functions

  • New functions in the tree:

- edit drawing elements selectively,
- lock/unlock drawing elements,
- make drawing elements visible/invisible.

  • Draw LINE, RECTANGLE, LONGHOLE and ENGRAVING TEXT with centre.

  • Edit LINE, RECTANGLE, LONGHOLE and ENGRAVING TEXT, choosing M (middle) as starting point.

  • Extension of command bar argument  (Parameters file, Program start, ...)

  • Engraving texts and its proprieties are displayed in the drawing area immediately.

  • Bore cycle with POINT and POINTLIST

- without chip breaking
-
short chip breaking
- with retraction

  • Enter chord length or segment height individually when dissolving arcs.

  • High Power C-Axis: set maximum motor speed of the servo in the parameters window.

  • Assistant to seek the COM-Port for machine control.

  • WZP (workpoice zeropoint) visible/in visible.

  • Adaptation of the version evaluation for old interfaces.

  • Service-window ("F8") for old interfaces.

  • TeachIn for relays, DOut, DOutA in manual control.

  • Speed factor C-axis.


General corrections and improvements

  • Positions for the three engraving text windows are saved.

  • Spooler operation with LookAhead: will not longer be switched off with the commands G20, G22, G24, G90, G91, G98, G99.

  • Program behaviour when max. number of files is reached.

  • Infeed for borings (POINT, POINTLIST).

  • M05 – BaeMakro only when necessary.

  • Keyboard control: C-axis [*] and [/], B-axis: [Shift] [+] and [Shift] [-]

  • Functions for 3D-Scan.


Date: 2014 - 11 - 11
General corrections and improvements

  • Adaptation of the functions Automatic Toolchanger for interfaces older than IF5

  • Adaptation of the functions with Basic Macros

  • Correction of parameters entries for C-axis

  • Automatic input of tools in the Technologie window after input in tool correction memory


Date: 2014 - 10 - 01

New functions

  • Function "Contour & Body", from polygon to STL-body

  • Drawing element Ellipse  

  • Conversion into 3D Polygon, the polygon gets information of depth

  • Picture import, EMP-JPG-GIF

  • Adaptation of the resolution when circles and arcs are converted into polygons and lines

  • Curve Interpolation, Curve Approximation

  • Tabulator for NC-Editor can be set (Tab i replaced by numbers of spaces)

  • Scale/stretchshrink drawing elements in axes relation

  • Shift OpenGL-view by mouse (press mouse wheel and Ctrl key)


General corrections and improvements

  • Completion of servo mode for High Power C-axis

  • Handwheel operation for A-, B- and C-axis

  • Change the jump width when using the cursor in the manual control window by [CTRL] + [SHIFT] +[F1...F5]

  • Correction factor for the speed of the Z-axis when using cursor  

  • Save / Read the names for voltage output and digital outputs

  • Validation of the AIN query in F8-window

  • Revision of NC-Editor, permanent syntax-check with "folded" editor-window only

  • Automatic docking of the NC-editor with diverse actions ( DXF import, close active file,...)

  • Adaptation of program paths to current operating systems and user accounts

  • Set display of marker points

  • Save format data for the drawing sheet

  • Extension of display functions in the tree Drawing elements (hide/show contours)

  • Automatic scroll in the tree Drawing elements with Drag & Drop

  • Display of the cursor adapted to construction grid

  • Correction for G20-code in spooler operation

  •  Automatic adaptation of group technology for blind hole or pocket

  •  Workpiece copy functions with M05/M06 revised

  •  Adaptation of save-behavior when finishing nccad


Date: 2014 - 05 - 08

New functions

  • Tangent, exterior tangent, interior tangent

  • Thread milling

  • Dimensioning angle

  • Show the arrows with dimensioning


General corrections and improvements

  • Delete group in the tree Drawings

  • M05 with copies

  • Corrections in the function "Quick&Simple STL"


Date: 2014 - 02 - 04

New functions:

  • 3D print prepared

  • HPGL-Import

  • Gear exterior teeth, gear interior teeth, gear rack – saved as symbol in the tree

  • Workpiece copies

  • Micro jet dispensing

  • Single steps in simulation by mouse wheel

  • Construction catch on WZP via [SHIFT]

  • Oblong hole as blind hole, show auxiliary lines

  • Assistant Quick & Simple revised, new Quick & Simple library

  • Polygon generation

  • Technology import from version 7.x revised

  • DXF import revised

General corrections and improvements

  • Saveguard of movement with very small arcs

  • Saveguard with circular blind hole, when diameter of milling cutter equals diameter of circle


Zurück zum Seiteninhalt | Zurück zum Hauptmenü