Update nccad9turn PROXXON eng - MAXcomputer & mechatronik

Direkt zum Seiteninhalt

Hauptmenü:

Update nccad9turn PROXXON eng

PROXXON

Updated/Aktualisiert: May 2020


Please have also a look in our shop where you can order more accessories like handwheel with axes switch for 2 or 3 axes, tool-length measurer, 3D-scanner, etc.


Wählen Sie Ihre Sprache  Select your language  Choisir votre langue

Update of January 2020 for PROXXON customers, who have already installed nccad9turn!

Update of nccad9 / Turn

Date: January 2020


Attention!

This download is to be used for
PROXXON lathes
only.

Notes concerning the installation of nccad9
nccad9 requires the .NET-Framework 2.0. Since Windows7 it is part of the operating system.
Depending on the version of your operating system and the type of installation it may be necessary
to activate the .NET-Framework 2.0 separately as feature in the operating system.
You find relating instructions in the internet.
After the installation of nccad9 it may be possible that the operating system displays a message:
"This program might not have installed correctly"
Usually this message can be ignored.
If problems occur with the execution of nccad9 after installation it is advised to repeat  
installation explicitly as administrator.
We recommend to run nccad9 as administrator.

New functions ans supplements
Date: January 2020
New
  • Display of the logotype on the header of a printout of drawing files
  • Portable-Version "nccad9 solo" available as testversion
Supplements, Corrections
  • Correction of display in manual control
  • Revision of G77 execution as Basic-Macro
  • Determination of fonts for labelling and dimensioning
  • Query of file version "... was generated with a newer version" is corrected
  • Spindle revs for turning added
  • Replacement of tools in tool correction memory is revised, the old data are deleted
  • Corrections for the printout of drawings concerning dimensional accuracy and page layout
  • Revision of issue of NC-Code with "Quick&Simple"


Date: December 2018

New:
  • Adoption of the Windows10 features in all versions
  • Addition of the code G99 by the CAM-module at the end of the program
Supplements, corrections:
  • Drawing element Unclamping position is found in CNC only if in a visible group
  • Start sequence of the axes is changed for TURN: Z before X
Zurück zum Seiteninhalt | Zurück zum Hauptmenü